Fort Mcmurray Forklift Training School

Fort Mcmurray Forklift Training School - Forklift Training School - CSA and OSHA establish criteria for forklift safety training which meets current standards and regulations. Anybody intending to use a forklift is needed to successfully finish safety training prior to using whatever kind of forklift. The accredited Forklift Operator Training Program is intended to offer those training with the practical skills and knowledge to become an operator of a forklift.

Mobile Equipment and Vehicle safety regulations which apply to forklift use consist of pre-shift checks, and regulations for loading and lifting.

Prior to a shift starting, an inspection checklist must be completed and submitted to the Supervisor or Instructor. If whatever maintenance issue is discovered, the equipment should not be used until the problem is addressed. To indicate the machinery is out of service, the keys have to be removed from the ignition and a warning tag placed in a visible location.

Loading safety regulations consist of checking the forklift nameplate's rating capacity and knowing if the weight of the load falls within capacity. The forklift forks must be in the down position when the forklift is starting up. Remember that there is a loss of roughly one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

In order to safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch under the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to warn other employees. Never allow forks to drag on the ground.

Click to Download the pdf